Featurs:
- High quality laser beam,High Cutting speed.
- Precise digital control in the process of production.
- Unique laser coating technology enhances the laser tube power and improves its life time.
- Extensive Application:Pen engraving,wood&bamboo engraving,stamp engraving ,toy cut,artware engraving,plastic engraving.
Model:LZ-40W
Length:700mm
Pipe Diameter:50±1mm
Wavelength:10.6um
Output Power Stable Value :40W
Max Output Power :45w
Triggering Voltage :26-28KV
Working Voltage :19-22KV
Triggering Current :4±1mA
Max Working Current :19mA
Type Of Cooling: Water-cooling 15-35℃
Impulse Frequency: 100% to 5KHZ
Spot Diameter:4±1mm
CO2 laser (laser tube) Installation instructions:
1. Make sure the electrodes are connected correctly;
2. The cooling water pipe installation. When installing water pipe, please make sure the cooling water inlet must follow from the positive tonegative, and down into the water, and the interface is not leaking. Before starting the laser tube must store enough water in the water cooling pipes and no air bubbles before use (must check every time before start laser tube). If the laser tube is mounted vertically, please ensure that no air bubbles at the top of the laser tube. It will cause thermal shock when it runs with air bubbles in the water pipe, which is easy to damage your laser tube.
3. To maintain the good performance of laser tube, keep the cooling water temperature between 20-25 °C. The instability of cooling water's temperature will influence laser tube output power.
4. When installing the laser tube, please try to ensure the 1/4 point in laser tube length is on laser tube holder, this can help your laser tube get best working performance. And leave enough space between the laser tube positive end (it has high voltage electricity) and any metal surface of your laser machine. If the space is not big enough, it will cause ignition between high voltage power used to trigger the laser tube and the metal surface of laser machine, and thus lead to laser tube damage and even breakdown of major electronic components on your laser machine.
5. Recommend laser machine consumers to put automatic checkout device into your laser tube water cooling system to prevent laser tube stoppage due to overheating failure caused by lack of water when laser tube is working, please consult your laser machine supplier for details.
Thanks for your purchase of laser tube in our store.
We tested 100% work and packed well then ship out.
Anyway cause it's metal tube so fragile and sometimes maybe get broken in transit even we packed well
So please connect us as soon as possible if you find the tube is broken.We will give you the most suitbale solutions .We will send you a new tube or refund you.
